weighing solenoid valve

1.solenoid valve 2.applicable Medium:air 3.channel position: 2/5 4.connect type: thread 5.flow direction: single-track

solenoid valve

The solenoid valve is used to control the automation of basic components of the fluid belonging to the

actuator; not limited to hydraulic, pneumatic. The solenoid valve used to control the gas flow direction,

the mechanism of the plant is normally the hydraulic steel control solenoid valve, so it will be used.

Principle: the solenoid valve closed cavity in a different location to open the through-hole, each hole to different tubing cavity intermediate valve, on both sides of the two electromagnets,

which surface of the magnet coil is energized the valve bodywill be attracted to which side to move through

the control valve body to file live or leaked oil discharge hole into the hole is always open, the hydraulic oil

into the drain line, and then through the oil pressureto promote just oil the piston, the piston to drive the

piston rod, piston rod drive mechanism moving. This control solenoid current control of mechanical motion.

Technology parameter:

Ontology Wide	22mm
Pipe Diameter Code	8A
Valve Type	3/2,5/2,5/3
Ontology Type	straight pipe type,abreast type
Pipe Diameter Size	PT1/4
Applicable Fluid	air
Applicable Pressure Range	2~7kgf/cm2, 3~7kgf/cm2(5/3)
Compression Resistance	10kgf/cm2
Flow Rate	799 Nl/min,710 Nl/min(5/3)
Effective Cross Sectional Area	16mm2~18mm2
Response Time	30ms, 40ms(5/3)
Ambient Temperature	-5°C~+50°C (Don't freeze)
Rated Voltage	AC110,220V,DC24V
Electricity Consumption	AC=6/4.9VA,DC=2.5W
Voltage Range Allows	±10%
Class Of Insulation	F
Weight	203g~338g

weighing solenoid valve